The revolutionary T400 focuses on intelligent, integrated and high precision of multibeam echosounder system. Its ultra-compact design can be easily operated by one person and suitable for USV, ROV, AUV platforms.
The number of 1024 sounding beams can provide you with high precision measurement result. Because of IMU built-in receiver, this system does not need calibration. With low power consumption, it is also suitable to operate from battery.
T400, small, lightweight and cost-effective could be your best choice.
Applications
Bathymetry
Pipeline Surveys
River, Estuary, Channel and Pond Surveys
Harbor and Coastline Surveys
USV, ROV & AUV Integrated
Geological Survey
Search and Rescure
Specification
Sonar parameters
Model
T400
Frequency
400kHz
Swath Coverage
Up to 140°
Beam Width
2°(TX) *1°(RX)
Number of Soundings
1024 soundings
Depth Range
0.2-150m
Depth Resolution
0.75cm
Beam Patterns
Equidistant and high density
Ping Rate
Up to 60 Hz
Signal Form
CW/FM
Pulse Width
17μs -2ms
Depth Rating (Sonar head)
50m
Roll Stabilization
±10°
Installation Calibration
Free
Side scan
Support
Real-time Roll Stability
Support
Heading Accuracy(GNSS)
0.1° (2m baseline)
Roll/Pitch Accuracy
0.05°
Horizontal Accuracy
2cm+1ppm(RTK) 0.6m(SBAS)
Heave Accuracy
5cm/5%
Electric Parameter
Power Supply
DC18-36V (Type:24V) C AC100-240V
Power
60W
Output Interface
LAN Port*1 3.3V TTL*1 RS232*1
Cable Length
15m(Customized)
Projector Size
220mm×89mm×88mm
Receiver Size
128mm×80mm×88mm
Sonar Process Unit
196mm×142mm×73mm
Sonar Process Unit
1.55Kg
Projector and Receiver
5Kg
Operation Temperature
-2°C~40°C
Storage Temperature
-20°C~55°C
Software
Onboard data collection and diaplay software Onboard data process software
Note: all information above is subject to change without any prior notice.
