Galaxy G5 is designed to enhance your performance in the field survey and to provide the most reliable positioning result.
It integrates a 1760 channels world leading GNSS positioning engine, a high precision IMU, a long range UHF radio, and a new interact operating system.
South G5 GNSS RTK Rover Set including: G5 GNSS RTK Rover Receiver, including Receiver/charger/typeC cable/hardcase, 2.5m telescope carbon fiber pole, UHF antenna, H6 controller and set bracket
South G5 GNSS RTK Rover Set including: G5 GNSS RTK Rover Receiver, including Receiver/charger/typeC cable/hardcase, 2.5m telescope carbon fiber pole, UHF antenna, H6 controller and set bracket
More channels and all constellations tracking
With 1760 GNSS channels solution, Galaxy G5 can support multi-constellation and multi-frequency tracking with the help of high-performance GNSS antenna.
Color touch screen, makes workflow simpler
HD 1.3-inch color LCD touch screen with high brightness and low power consumption, which is convenient and efficient to complete touch settings, information browsing, function settings.
More powerful inbuilt radio
Coupling a high-performance UHF module with Farlink communication technology, which increases signal sensitivity and transmission efficiency, Galaxy G5 really achieves the goal of a 10~15km ultra-long-distance working range. And the power consumption of this carrying new generation module is 60% lower than additional UHF, making the Base working time is much longer.
Superior Endurance, Up to 25 hours working
Galaxy G5 uses a built-in 10000mAh ultra-large capacity Li-ion battery, which can last 25 hours of continuous work (Static) benefits from low power consumption circuit design. The Type-C interface is used on G5 that it can support fast charging through a charger with PD protocol, and it can be full charged in 4 hours.
Double data backup
The measured data can be simultaneously stored into both internal memory of receiver and controller, realizing the measured data double backup, which effectively avoid data loss.
Outstanding IMU measurement
Built-in 4th-generation IMU automatic compensator corrects the coordinates to the pole tip, assisting surveyors to quickly and accurately measure or stake out point at will without strictly leveling the receiver, the tilt angle range can achieve up to 60°.
Upward and hidden UHF antenna design
Upward UHF antenna design, achieving all-direction UHF signal receiving and transmitting. And the antenna interface is hidden into top cover that effectively avoid accident breaking, protect from water and dust.
Intelligent base signal locking technology
Using one-to-one signal tracking and locking technology, and the independent frequency under Farlink protocol, the G5 rover can continuously lock and capture the target base station signal to reduce cross-frequency interference even though other base stations are working nearby with the same channel.
Smart system management-ROS
Galaxy G5 is integrated with the ROS system, which comes with intelligent deployment of multi-mode hardware components, strong computing power and an intelligent scheduling mechanism, and coupling with an ultra-fine memory management mechanism, making the fluency and running speed of the receiver comprehensively improved.
Specification
GNSS Features
Channels
1760
GPS
L1C/A, L1C, L2C, L2P, L5
GLONASS
L1C/A, L2C/A, L2P, L3CDMA
BDS
B1I, B1C, B2I, B2a, B3
GALILEO
E1, E5A, E5B, E5AltBOC, E6
SBAS
EGNOS, WAAS, GAGAN, MSAS, SDCM(L1,L5)
QZSS
L1C/A, L1C, L2C, L5, L6
Navic
L5
On module L-Band (Reserve)
Positioning output rate
1Hz~50Hz
Initialization time
< 10s
Initialization reliability
> 99.9%
Positioning Precision*
Real-time kinematic (Baseline<40km)
Horizontal: 6 mm + 0.5 ppm RMS Vertical: 10 mm + 1 ppm RMS
GNSS static
Horizontal: 2.5 mm + 0.5 ppm RMS Vertical: 5 mm + 0.5 ppm RMS
Standalone
Horizontal: 1.2m Vertical: 1.9m RMS
DGNSS
Horizontal: 0.4m Vertical: 0.7m RMS
SBAS positioning
Horizontal: 0.6m Vertical: 0.8m RMS
RTK initialization time
2 ~ 8s
IMU tilt compensation
Additional horizontal pole tip uncertainty typically less than 10mm + 0.7 mm/° tilt down to 30°
IMU tilt angle
0° ~ 60°
Hardware Performance
Dimension
165mm(φ) × 108mm(H)
Weight
1.35kg (battery included)
Material
Magnesium aluminum alloy shell
Operating temperature
-45℃ ~ +65℃
Storage temperature
-45℃ ~ +85℃
Humidity
100% Non-condensing
Waterproof/Dustproof
IP68 standard, protected from long time immersion to depth of 1m IP68 standard, fully protected against blowing dust
Shock/Vibration
Withstand 2 meters pole drop onto the cement ground naturally
Realizing close range (shorter than 10cm) automatic pair between receiver and controller (controller requires NFC wireless communication module else)
WIFI
Modem
802.11 b/g standard
WIFI hotspot
Receiver broadcasts its hotspot form web UI accessing with any mobile terminals
WIFI datalink
Receiver can transmit and receive correction data stream via WiFi datalink
Data Storage/Transmission
Storage
16GB SSD internal storage standard, extendable up to 64GB Automatic cycle storage (The earliest data files will be removed automatically while the memory is not enough) Support external USB storage The customizable sample interval is up to 20Hz
Data transmission
Plug and play mode of USB data transmission Supports FTP/HTTP data download
Static data format
STH, Rinex2.x, Rinex3.x
Differential data format
CMR, RTCM 2.x, RTCM 3.x(MSM included)
Position output data format
NMEA 0183, PJK plane coordinate, SBF
Network model supports
Fully support NTRIP protocol
Sensors
Electronic bubble
Controller software can display electronic bubble, checking leveling status of the carbon pole in real-time
IMU
Built-in IMU module, calibration-free and immue to magnetic interference
Thermometer
Built-in thermometer sensor, adopting intelligent temperature control echnology, monitoring and adjusting the receiver temperature
User Interaction
Operating system
Linux
Buttons
Dual-button
Indicators
3 LED indicators
Display
1.3-inch color touch screen
Web interaction
With the access of the internal web interface management via WiFi or USB connection, users are able to monitor the receiver status and change the configurations freely
Voice guidance
It provides status and operation voice guidance, and supports Chinese/English/ Korean/Spanish/Portuguese/Russian/Turkish
Secondary development
Provides secondary development package, and opens the OpenSIC bservation data format and interaction interface definition
Cloud service
The powerful cloud platform provides online services like remote manage, firmware update, online register and etc.
*The data comes from the SOUTH GNSS Product Laboratory, and the specific situation is subject to local actual usage.