The Sniffer4D Nano2+ is a hyperlocal multi-gas sensing and mapping system that can sense up to 6 gases in real-time, helping to improve safety by detecting leaks remotely.
It is compatible with DJI Dock 3 and the DJI Matrice 4D Series, as well as the DJI Matrice 4 Series, and the DJI Matrice 400.
Up to 5 internal modules can be installed inside a Sniffer4D Nano2+ base unit, enabling you to choose the modules that fit your application. See FAQs to view available modules.
The Nano2+ offers multi-platform support, including the AIRINS.ai platform to view maps and models of gas concentrations, and DJI FlightHub 2.
For a dedicated methane detection solution, view the Sniffer4D Nano2+ MP-TDLAS Methane Sensing System, available as a stand-alone unit.
Compact and lightweight design: Weighs ≤200g. Active air intake system reduces response times.
Customisable configurations: Sense up to 6 gases at a time. Install up to 5 modules inside the base unit, with parameters including PM2.5&10, TSP/PM100, O3+NO2, CO, SO2, H2S, O2, NH3, HCI, HCH, HF, H2, C12, PH3, NO, SO2, CO, CxHy/CH4/LEL, CO2, TVOC, HCHO. See FAQs for module details and contact heliguy™ to discuss further.
DJI Dock integration: Direct plug-and-play connection to the E-Port on DJI Matrice 4D/4TD and DJI Dock 3 (mounting screws included) – ideal for an automated and remote drone-in-a-box gas detection solution. Can also be used with the DJI Matrice 4D drones, independently of DJI Dock 3.
DJI Matrice 4 Series compatibility: The Nano2+ is also compatible with the DJI Matrice 4E/4T via the E-Port and PSDK power cable (integration kit sold separately). Please note, certain configurations will mean the Nano2+ takes the Matrice 4 Series drones over their maximum take-off weight. Contact heliguy™ to discuss further.
DJI M400 compatibility: The Sniffer4D Nano2+ is compatible with the DJI Matrice M400. The M400 supports multi-payload integration: Enabling 2 x Sniffer4D Nano2+ Multi-Gas; or a Multi-Gas and a Sniffer4D Nano2+ Methane unit; or a Multi-Gas and a MetScan V1.
Key insights: Measure temperature, humidity, and atmospheric pressure simultaneously.
Seamless Connectivity & Data Transmission
Multi-device communication and robust LTE support
Swarm supported: One or multiple Sniffer4Ds can communicate with one or multiple PCs.
Robust connectivity: Built-in LTE connectivity with no external antenna. Support global 4G, 3G, EDGE, and GPRS network. Purchase NanoSIM separately.
Data transmission: Real-time encrypted data transmission (1Hz) with data retrieval algorithm. Store up to 12 hours of data when connection is lost. Automatically retrieve data after the communication is reconnected.
Real-time data forwarding: Sniffer4D Nano2+ supports real-time data forwarding to user-specified software platforms using MQTT protocol (4G internet connection required).
Comprehensive Platform Integration & Analytics
Multi-platform support and advanced data visualisation
Full DJI Payload SDK support: View Sniffer4D Nano2+’s real-time data or control Sniffer4D with the DJI Pilot app on the DJI remote controller.
Multi-platform support: Compatible wth AIRINS.ai platform, DJI FlightHub 2 (including real-time data viewing and device control), and third-party platforms for efficient data processing and management.
Analytics: Use SSI for real-time and historical data insights; Visualise data using 2D grid, 2D isoline, and 3D point cloud maps; and view concentration maps to identify hotspots and assess their impact.
Mission data backup: Sniffer4D’s built-in SD card (.s4d format) supports mission data back-up. Read and analyse the stored mission data through the AIRINS.ai platform.
